Saturday, November 29, 2008

How To Clean Airsoft Gun And Where You Can Get Cleaning Kits


Cleaning an airsoft gun

  • Exterior
    1. Remove the battery or gas tank
    2. Use a clean cloth to wipe clean
    3. For the grit, use cotton swabs
    4. Finished

  • Magazine
    1. Remove the magazine from the gun
    2. Wipe down the gun with a clean cloth
    3. Use cotton swabs to clean the small areas
    4. Add a few drops of oil to any moving parts
    5. Insert magazine back into the gun
    6. Finished

  • Barrel
    1. Turn off your gun’s hop up system
    2. Use a cleaning rod with the .22 cleaning patch
    3. Add a small amount of silicon spray to the patch
    4. Insert the cleaning rod into the barrel
    5. Swab the inside with an in and out motion
    6. After a few swabs, remove rod from barrel
    7. Replace with a new dry patch
    8. Repeat steps 4 and 5 with the clean patch (this clears any remaining residue in the barrel)
    9. Finished

Caution: Cleaning your gun properly on regular occasion might cause it to have enhanced performance, such as more accuracy, less jamming, quicker shooting, and longer life. Ask yourself, “Would I be happy if I was dirty all the time?”

Rws Shooter Cleaning Kit for Airgun .177 Caliber

RWS Shooter Cleaning KitEverything need to shoot and maintain your RWS airgun in one complete package. Contains: Rod, Chamber Lube, Spring Cylinder Oil, .177 JAGD, .177 Swab, 1 Tin each/250 of Meisterkugeln Pellets and Superdome Pellets; 25 each .177 Cleaning Pellets and 10 each 4 x 4 Targets..177 Caliber Air Gun Cleaning Kit

Counter